Selecting Powder Spray Gun Attachments

Powder Coating Infrared Cure
September 4, 2015
powder coating spray gun
Electrostatic Powder Spray Guns
September 4, 2015
Show all

Selecting Powder Spray Gun Attachments

Email this to someoneShare on FacebookShare on LinkedInTweet about this on Twitter

Selecting proper powder spray gun attachments is another important consideration in powder delivery systems. There are a host of different tips available today by all manufacturers for all equipment. There are flat spray nozzles, extension tips, various deflector sizes and shapes. Each of these tips serve different purposes and create different cloud patterns for penetrating different areas.

It is important to have flexibility with cloud patterns, particularly when you’re running a job shop with multi-metals and lots of different geometries.

The powder cloud adjustment is really important. Normally when you receive these guns, (when they’re brand new) they come with a very large deflector, creating a very large cloud pattern. Well, if you’re coating very small parts with a very large cloud pattern, what are the chances of you getting down to a reasonable transfer efficiency rate? Very slim, because you’re coating a lot of air surface and very little parts surface. selecting powder spray gun attachments

If you have too fine or too tight of a powder cloud, changing the deflector can cause too much velocity unless the powder delivery system is backed off accordingly. You can see all of the over-spray behind the part here? The proper setting is a small tip for a small part with just enough powder to get coverage on the part. Remember that the goal is to get the powder out of the box onto the part, not through the collector system.

Powder cloud adjustment is something that requires a little skill, a little time behind the gun and trying different tips. There is no perfect tip for all applications. Experiment with them.

Extension lances will help you get into recessed areas. It also makes it easier for the applicator. Think about it, you’re covering a two-foot area and you’re trying to do that with a manual gun with a short tip. You spray like this, it takes a lot of arm action to cover a certain area. If you’ve got an extension, this much action covers this much area. A lot less effort by using a lance. My applicators love to use the 6″ extension for the guns.

Related Resources

Selecting Powder Spray Gun Attachments